Item # Emralon 333, Emralon 333 on Coating Systems, Inc.


Products & Services
::	Dry Film Lubrication
::	Chemical Coating Processing
::	Military Specification Coatings
::	Coatings for Seals, O-Rings and Gaskets
::	Custom Coatings
::	Fluoropolymer Coatings
::	Teflon Coatings


All Categories > Dry Film Lubrication > Acheson > Acheson > Item # Emralon 333

larger image

Item # Emralon 333 Emralon 333

Fluoropolymer coatings are used to lubricate lightly loaded parts and provide non-stick properties due to their extremely low static coefficient of friction.

Rubber "O" Rings for assembly and lubrication
Metal Shafts in corrosive and solvent environments

Graphite coatings pefrom particularly well in slightly humid conditions or at elevated temperatures They are offer good lubrication at competitive pricing.

Gaskets for durability and non-adhesion
Anti-seize for metal psrts in temperatures over 1000°F (538°C)

Molybdenum disulfide coatings are suitable to separate yet lubricate surfaces under pressures beyond the point of plastic deformation of steel.

Extreme conditions where product failures would be critical
Situations where product failure would be unacceptable.

Specifications

Lubricating Pigment		Fluoropolymer

Resin		Polyamide-imide

Carrier		SB-3

Cure		Air Flash +10 Min. @ 150ºC (300ºF)

Color (Cured)		Black

CoF (Static)		0.09

Service Temperature		204 ºC 400 ºF

Salt Spray Resistance		High

Solvent Resistance		High

Coverage		590 sq ft/gl @ 0.5 mil

VOC		6.75 lbs/gl (808 g/l)

Substrates		Metal

Application		Spray