Item # Emralon 329, Emralon 329 on Coating Systems, Inc.


Products & Services
::	Dry Film Lubrication
::	Chemical Coating Processing
::	Military Specification Coatings
::	Coatings for Seals, O-Rings and Gaskets
::	Custom Coatings
::	Fluoropolymer Coatings
::	Teflon Coatings


All Categories > Fluoropolymer > Fluoropolymer Coatings > Acheson > Item # Emralon 329

larger image

Item # Emralon 329 Emralon 329

Fluoropolymer coatings are used to lubricate lightly loaded parts and provide non-stick properties due to their extremely low static coefficient of friction.

Rubber "O" Rings for assembly and lubrication
Metal Shafts in corrosive and solvent environments

Graphite coatings pefrom particularly well in slightly humid conditions or at elevated temperatures They are offer good lubrication at competitive pricing.

Gaskets for durability and non-adhesion
Anti-seize for metal psrts in temperatures over 1000°F (538°C)

Molybdenum disulfide coatings are suitable to separate yet lubricate surfaces under pressures beyond the point of plastic deformation of steel.

Extreme conditions where product failures would be critical
Situations where product failure would be unacceptable.

Specifications

Lubricating Pigment		Fluoropolymer

Resin		Thermoplastic

Carrier		SB-1

Cure		Air Dry 2 Hours at room temperature

Color (Cured)		Clear

CoF (Static)		0.06 - 0.09

Service Temperature		82 ºC 180 ºF

Salt Spray Resistance		Not Reccommended

Solvent Resistance		Not Reccommended

Coverage		400 sq ft/gl @ 0.5 mil

VOC		6.50 lbs/gl (778 g/l)

Substrates		Rubber, Wood, Glass, Metal, Plastic

Application		Spray Dip-Spin Brush